|
自行砌機套件價 KIT SET
Please note that
- Japanese installation manual only
- Limited technical support
- AC100V only
- No warranty
- Spare parts ordering
- Prices are existing stock only
- Only available at CNA MUSIC LIMITED
|
TU-881CD
12AU7
Vacuum Tube Stereo CD Player
自行砌機套件價
SOLD OUT
Limited Period / Limited Qty.
|
< Specification >
- Vacuum tube: Philips JAN 5963 (12AU7)
Made in USA x 1
- Frequency response: 20Hz - 20,000Hz
- Sampling frequency: 44.1kHz
- - Signal-noise ratio （when 0dB）: 80dB（ASP
OFF）, 79.4dB（ASP ON）
- Harmonic distortion (when -20dB): 0.1%(ASP
OFF), 0.32%(ASP ON)
- Pickup: semiconductor laser （1-bit DAC）
- Output: 150mVrms （0dB when 1.5V）
- Function: Anti-skip
- Play mode: REPEAT（1/ALL）, INTRO, SHUFFLE
- Power supply voltage: AC100V 50/60Hz
- Power consumption: 6W
- Dimensions: W153 x H125 x D300mm (including
projections)
- Weight: Approximately 3.3kg
- Accessories: RCA audio cable |
  TU-872LE
2A3EH GOLD
single stereo power amplifier [limitation production]
自行砌機套件價
Kit Set Price: ASK (Pre order
only) >>>> BUY |
<Specifications>
- Vacuum tube: 2A3EH GOLD × 2 and 6SN7EH
× 2
- Rated output: 5W+5W (RL=8Ω, 1kHz and Vin=400mVrms)
- Frequency characteristic: 10Hz - 60kHz
(- 3dB and Po=2W@1kHz)
- Conformity speaker impedance: 4 - 16Ω
- Output terminal: Large-sized Johnson terminal
(banana plug use also)
- Input terminal: 3 system of RCA jack [LINE1,
LINE2 and TAPE (MD) MONITOR (input resistance: Approximately
40kΩ)]TAPE (MD) REC output attaching
- Power source: AC100V 50/60 75 W AC inlet
attaching
- Dimensions (mm): W220 × H200 × D425 (projection
ones it includes)
- Weight: Approximately 10 kg |
TU-879S
6L6GC
single stereo power amplifier
*Without remodelling and compatible
with 6L6GC, 6CA7, EL34, KT66, KT88, GT-6L6GE, Western Electric
350B and 曙光 350C
自行砌機套件價
Kit Set Price: ASK
>>>> BUY |
< Specification >
- Vacuum tube: 6L6GC EH × 2 and 12AX7 (ECC83)
- Rated output: 8.5W + 8.5W (at the time of
8 Ω load)
- Conformity speaker impedance: 3.2 - 5 Ω,
6 - 16 Ω
- Residual noise (8 Ω time): 0.26mV (WIDE),
0.035mV (IEC weighting)
- Signal-noise ratio (8 Ω time): 90dB (WIDE),
107.5dB (IEC weighting)
- Frequency characteristic (-3dB): 20Hz - 43,000Hz
- Input resistance: 75k Ω
- Rated input: 430mV
- Input terminal: Line input × 2 system (RCA
jack)
- Power source: AC 100V 50/60Hz
- Electric power consumption: 70W
- Dimensions: W154 × H150 × D400mm (the spine
is included)
- Weight: Approximately 6.5kg |
TU-870
6BM8
v acuum tube stereo power amplifier
自行砌機套件價
Kit Set Price: ASK>>>>
BUY |
< Specification >
- Vacuum tube: 6BM8 (ECL82) × 2
- Rated output: 2.0W+2.0W (at the time of 8
Ω load)
- Rated input: 600mV
- Input resistance: 90k Ω
- Output impedance: 8 Ω
- Residual noise: 1mV (WIDE), 0.12mV (IEC weighting)
- Signal-noise ratio: 72dB (WIDE), 90dB (IEC
weighting)
- Frequency characteristic: 26 - 37,000Hz
- Power supply voltage: AC100V 50/60Hz
- Electric power consumption: 30W
- Dimensions: W130 × H135 × D263mm (the spine
is included)
- Input terminal: RCA (pin) terminal stereo
× 2 system
- Weight: Approximately 3kg |
TU-875
12AU7
Hybrid stereo pre-amp
自行砌機套件價
Kit Set Price: ASK>>>>
BUY |
< Specification >
- Vacuum tube/FET (signal system): Philips
JAN 5963 (12AU7) Made in USA × 3 and 2SK170 × 4
- Input terminal: PHONO × 1 (it changes MC/MM
with the switch of the rear panel), LINE×2 and TAPE (MD) the
× 1
- Output terminal: PRE-OUT × 1and REC-OUT ×
1
- Input resistance: PHONO:100 Ω (MC), 50k Ω
(MM)/LINE TAPE (MD): 40k Ω
- Rated input: PHONO:0.3mV (MC), 2.7mV (MM)/LINE
TAPE (MD) 230mV
- Installed capacity (1kHz and THD2%): PRE-OUT/22V
REC-OUT (at the time of PHONO)/13V
- Signal-noise ratio (IEC): PHONO/72.5dB (MC),
84.5dB (MM), LINE TAPE (MD) 94dB
- Frequency characteristic: Within PHONO/RIAA
deviation 0.8dB, LINE TAPE (MD) 2Hz - 130kHz (-3dB)
- Power source: DC7V±0.5V (consumed electric
current approximately 1.8A), private stabilization AC adapter
attachment (input AC100V 50/60Hz)
- Dimensions: W130 × H125 × D248mm (projection
ones are included)
- Weight: Approximately 1.8kg |
